Hi Guys,
I have an F5B DOHC Turbo 4WD engine for sale. I bought it off Justjap in Sydney when I was looking for a replacement gearbox for my one but as it happens JohnnyC came to my rescue with his spare one when this was still on the boat. Was going to keep it as a spare but I am thinking of going the F6A route now.
When I bought it Justjap gave me a photo of the car from auction as proof that is was running but other than that I havent looked at it further. It is complete but they were pretty brutal on the connections. You know, cutting wires instead of unplugging them etc. Should still be able to wire up a battery and compression test etc if required (but I dont have the equipment to do it myself).
So yeh, full engine, all accessories, aircon compressor, 4WD gearbox, aftermarket blow off valve and F5B DOHC computer.
I'll put up some photos when I get chance in the next day or so
Thanks,
Daniel (Melb Vic)
FS: F5B DOHC Turbo & 4WD gearbox (cut loom, with compute
Yes it will fit in an MB with subframe mods, and yes it it registerable with an engineers certificate.
F8B EFI turbo - Three pots and a snail.
F5B is 547cc, and you can pull a pin in the box, remove the transfer case and make it FWD.
F8B EFI turbo - Three pots and a snail.
-
Goofy[HSK]
- Posts: 630
- Joined: Tue Nov 15, 2005 9:33 pm
- Location: South Australia
- Contact:
damn, I could do with a spare 
...
I noticed you've got a smashed windscreen, found a replacement for it? I f*ked mine prepping for rust repairs
... I noticed you've got a smashed windscreen, found a replacement for it? I f*ked mine prepping for rust repairs
'89 Alto Works RS/R - Awaiting: Paint, Windscreen, Compliance, Lottery
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
Heya Goofy,
Yeh, windscreens are evil. The only ones who even considered helping me get one were Justjap. Cost me $300 or $400. I've erased the memory as it made me cry at the time.
I suggested they get a few in when they got mine but i guess they arent the highest moving stock in the world and storage space is money. You asking might get them thinking!!!
Yeh, give Darron a call and he'll help you out. It'll just take time to find and time to ship.
Daniel
Yeh, windscreens are evil. The only ones who even considered helping me get one were Justjap. Cost me $300 or $400. I've erased the memory as it made me cry at the time.
I suggested they get a few in when they got mine but i guess they arent the highest moving stock in the world and storage space is money. You asking might get them thinking!!!
Yeh, give Darron a call and he'll help you out. It'll just take time to find and time to ship.
Daniel
Heya Daz3d,
I dont know anything about hatches and mightyboys but im assuming you would need to get driveshafts made up and modify the crossmember or custom engine mounts.
It is 4WD and Im not super sure if it can be made FWD. The transfer case is built into the gearbox but you might just be able to remove the gears for that part and install a blanking plate. Maybe a local FWD gearbox will fit up??
Daniel
I dont know anything about hatches and mightyboys but im assuming you would need to get driveshafts made up and modify the crossmember or custom engine mounts.
It is 4WD and Im not super sure if it can be made FWD. The transfer case is built into the gearbox but you might just be able to remove the gears for that part and install a blanking plate. Maybe a local FWD gearbox will fit up??
Daniel