Team MightyBoy

I want to replace my M/B seats. At the moment it is like sitting on some milk crates. Has anybody replaced their seats with other makes of vehicles. What vehicles seats will fit? thanks guys any help

The best fit I have found are seats from a late 80's Mazda 323. CRX seats are apparently also quite good.

On my Black Boy I have installed a pair of suzuki Baleno seats with the original MB rails and mounts: the passenger seat is a 20 minutes job. The driver side much longer due to the 'lifting" mechanism in the way. They look extremely similar to the Swift GTI and are extremely comfortable (much more comfortable than the Autotechnica I have on the HOLK) .

And for $100 a pair, it's a bargain!

Baleno/GTi seats are great, but the base is too high if you're a tall guy like me. I tried putting them in my MB but my head hit the roof!

It has taken 30 odd years but I've finally found an advantage of being a shorta#se!

Ive got Toyota MR2 seats in mine late 80's model. They fit very snug with drivers lumbar adjust

'79 Mitsi Colt seats here - pain to install but what I could get at the time. they are a tight fit & are a bit too high. I will be changing them out eventually - I will definitely look for coupe seats so I get the flick forward function for access to the rear cabin area.

All you guys who have replaced your MB seats, I need a drivers side seat base the ratchet on mine has died.
Also would like to get some of the seat covers so I can repair the worn out stuff on mine.
Any chance? will pay expenses.of course.
ta.

Holk,

the seats i have removed from the black one were not worth fixing and the holk came with no seats.

Sorry

just the lower frame will do I have the upholstery.

Thank you all for the onfo, I'm going down to Pick & payless in a few days so will have a look around. ta